Steel fence

Galvanized Barbed Wire 1.6-2.5mm for Farm and Boundary Fencing

Galvanized barbed wire with 1.6-2.5mm line wire, 2 or 4 point barbs at 76/102/127mm spacing, zinc coating 40-260 g/m2, 10-25kg coils on export pallets.
  • Galvanized Barbed Wire 1.6-2.5mm for Farm and Boundary Fencing
  • Galvanized Barbed Wire 1.6-2.5mm for Farm and Boundary Fencing
  • Galvanized Barbed Wire 1.6-2.5mm for Farm and Boundary Fencing
  • Galvanized Barbed Wire 1.6-2.5mm for Farm and Boundary Fencing
Galvanized Barbed Wire 1.6-2.5mm for Farm and Boundary Fencing
Galvanized barbed wire coil with a caliper checking the line wire diameter

Two-Strand Barbed Wire for Long Boundary Runs

Our galvanized barbed wire is a two-strand, reverse-twist wire with barbs set along the line, supplied in coils from 10 kg to 25 kg. Line wire runs from 1.6 mm to 2.5 mm and the barb wire from 1.6 mm to 2.0 mm, so one product covers both a light paddock divider and a stock-proof boundary that has to hold cattle. Every coil is measured before it is packed, not after: wire diameter with a caliper, barb spacing with a dial gauge, coating weight taken from the mill certificate. Send us your post spacing and the total run length and we will size the coil weight and the coating class to match the job rather than the other way round.

Where Galvanized Barbed Wire Fits

Barbed wire earns its place where a plain wire fence is too easy to push through and a mesh panel is more than the job needs. The four settings we ship for most often are farm boundaries and paddock sub-divisions, plantation and orchard edges where stock and wildlife both have to be turned, railway and highway verges where the fence has to run for kilometres without maintenance, and warehouse or yard perimeters where the wall already carries the main barrier and the wire only has to close the gap above it.

On a livestock boundary the wire is usually run as three or four strands on timber or steel posts at 0.9 m to 1.2 m, with the top strand carrying the barbs and the lower strands plain. On a long verge run the same wire is strung between concrete or steel posts at 3 m to 4 m centres, and the specification shifts from animal control to wind load and corrosion. Both jobs use the same coil; what changes is the wire diameter, the coating weight and the barb spacing, which is why those three numbers are the first thing we ask for.

Galvanized barbed wire coils stacked on timber pallets in the packing area

Barb Spacing, Point Count and Twist Direction

Dial gauge checking barb spacing on a coil of galvanized barbed wire

Barb spacing is given as the distance between adjacent barbs along the line and is normally quoted in inches: 3 in (76 mm), 4 in (102 mm) or 5 in (127 mm). Tighter spacing puts more barbs per metre and costs more per roll, so 3 in is chosen for short runs where deterrence matters more than price, and 5 in is the usual choice for long farm boundaries where the wire has to cover distance economically. Four inch spacing sits between the two and is the most common specification for mixed stock.

Point count describes how many wire points each barb carries. Two-point barbs are the standard farm configuration and are cheaper and quicker to handle. Four-point barbs present a denser cluster at each station and are specified where the wire is meant to be a real deterrent rather than a divider. The barbs themselves are wound onto the line wire and locked, so they cannot slide along the strand under tension, which is the failure mode to check for on a cheap coil: grip a barb and try to push it along the wire.

Twist direction matters more than buyers expect. Reverse twist, also written ZT, alternates the twist direction between the two line wires so the pair locks against itself. When a reverse-twist wire is cut, the strands stay together; a normal-twist wire of the same gauge will unwind at the cut end and has to be re-clamped on site. For long runs cut into many spans, reverse twist saves real time on installation.

Zinc Coating Decides How Long It Lasts

The wire diameter is what buyers ask about; the zinc coating is what decides whether the fence is still there in ten years. Coating weight is expressed in grams per square metre of wire surface and the range we supply runs from roughly 40 g/m2 for a light agricultural coil up to 240-260 g/m2 for a heavy coating intended for coastal or industrial air. The difference is not cosmetic. A 40 g/m2 coating on a humid boundary can show red rust within two or three seasons, while a heavy coating in the same place will still be sound when the posts need replacing.

Match the coating to the air, not to the budget alone. Inland and dry, a standard coating is sufficient and a heavier one is money left in the ground. Within a few kilometres of salt water, or downwind of a plant that puts sulphur into the air, the heavy coating pays for itself quickly because the alternative is re-stringing the whole run. Humid tropical sites sit between the two and are usually specified one class above what the inland calculation suggests.

Ask for the coating weight on the mill certificate, not a description. Brightness is a poor guide: a freshly galvanized light coating looks exactly like a heavy one on the day it is packed, and the two only separate after a couple of wet seasons. We quote the coating class in the offer so the number is on the record before the order is placed.

Micrometer checking the diameter of a galvanized barb on the wire
Digital caliper measuring barb wire diameter on a galvanized coil

Tensioning, Post Spacing and Strainer Assembly

A barbed wire fence fails at the ends and the corners far more often than in the middle of a run. Strainer assemblies at both ends, at every corner and at any change of direction carry the whole tension of the line, so they need heavier posts and proper diagonal bracing; the intermediate posts only have to hold the wire at height. On stock boundaries the intermediate posts are set at 3 m to 4 m centres, and the strainer spacing along a straight run is normally 100 m to 150 m, tighter on soft ground or where the fence changes level.

Tension with an inline ratchet or a wire strainer rather than by hand, and tension the top strand first because the lower strands follow it. A 1.6 mm line wire will stretch visibly before it reaches working tension and is best kept to short spans; 2.0 mm and 2.5 mm carry long spans without excessive sag. Leave a small amount of give rather than pulling the wire bar-tight, because a wire with no slack takes the full load of anything that leans on it and will snap at the first strainer instead of absorbing the push.

Height is set by what the fence has to hold. Around 0.9 m suits sheep and light stock, 1.1 m to 1.2 m is the usual cattle boundary, and a top strand set above the main wire at a slight outward lean is the cheapest way to discourage climbing without adding a full panel above the line.

Coil Weights, Packing and What to Send for a Quote

Export-packed galvanized barbed wire coils strapped to timber pallets

Coils are supplied at 10 kg, 15 kg, 25 kg and 50 kg. The lighter coils are easier to carry along a boundary on foot and are the practical choice for a run that has to be strung by hand; the 25 kg coil is the usual export unit because it balances handling weight against the number of ties per hundred metres. Each coil is compressed, tied with galvanized wire at four points and wrapped, then stacked on timber pallets and strapped so the load can be lifted as one unit rather than handled coil by coil. Loading is planned by total weight, so tell us the tonnage you need and we will work back to the coil weight and pallet count that loads cleanly.

To quote accurately we need five numbers: the total length of run in metres, the number of strands, the wire diameter you want for the line and for the barbs, the barb spacing, and the site conditions that set the coating class. If you have a drawing, a photo of the boundary, or a specification from a previous job, send that instead and we will read the numbers off it. Samples of a coil you are currently using are also useful when you are trying to match an existing fence on the same property.

Hebei Jinbiao has manufactured wire and fencing products for 30 years and supplies CE-marked goods with ISO 9001, ISO 14001 and ISO 45001 management systems. Overseas projects are supplied only; installation is not included. Send your run length and post spacing and we will come back with the coil weight, coating class and packing plan for your site.