868 and 656 Double Wire Fence: Choosing the Wire Combination
Three Numbers, One Panel
A double wire panel is described by three wire sizes: the paired horizontal wires first, then the single vertical wire between them. 8/6/8 means 8 mm horizontals around a 6 mm vertical. 6/5/6 means 6 mm horizontals around a 5 mm vertical.
Those numbers decide panel weight, stiffness and cost far more than the coating does, so they are the first thing to fix before comparing quotations.
What the Numbers Actually Change
Moving from 6/5/6 to 8/6/8 raises panel weight by roughly a third for the same aperture and height. Stiffness rises faster than weight, because the paired wire resists bending as a unit.
The practical effect is that 8/6/8 holds a flatter face over a wider post spacing, while 6/5/6 needs closer posts or a shorter panel to look the same.
Where Each Combination Fits
8/6/8 is the usual choice for industrial estates, logistics yards, substations and any boundary where the fence is likely to be leaned on or cut. 6/5/6 suits school perimeters, parks, housing edges and internal divisions where the fence is a boundary rather than a barrier.
On a long run the lighter panel often wins on total cost once post spacing is priced in, so the comparison should be made per metre of finished fence, not per panel.
Aperture and Height Together
Aperture is usually 50 x 200 mm on a double wire panel. A tighter aperture raises weight without adding much stiffness, so it is chosen for climb resistance rather than strength.
Height and aperture interact: a 2.4 m panel with a 50 x 200 mm aperture is a different climbing proposition from a 1.8 m panel with the same grid. Specify both, not one.
Weighing the Panel
Ask for the calculated panel weight on the quotation. Two suppliers quoting 8/6/8 at the same price with a 15 percent weight difference are not quoting the same panel.
We show wire diameter, aperture, panel size and calculated weight together so the comparison is like for like.