Galvanised Chain Link Fence with Top Rail
What the Top Rail Changes
A chain link fence with a top rail is a different product from the same mesh sold without one. The rail carries the panel, keeps the top edge straight over a long run, and takes the load when something pushes against the fence. Without it, the mesh hangs on the line wires and the top edge sags between posts within a season.
What the Rail Actually Does
The rail sits in aline post fittings at the top of the panel and is usually the part that keeps the fabric tensioned evenly. On a straight run the difference looks cosmetic. On a corner, a gate post or a run exposed to wind, it is the difference between a fence that stays plumb and one that leans within a couple of years.
Fabric or panels, posts, rail and fittings are quoted against the run and the height, so the set-out is agreed before the order.
Coating: Where Galvanised Stops Being Enough
Hot dip galvanising protects the wire by sacrificial action: the zinc corrodes instead of the steel, and the cut ends stay protected. It performs well inland and in normal rainfall. It is a weaker choice on a coast, next to a fertiliser store, or anywhere chlorides and ammonia are present, because the zinc layer is consumed far faster.
In those situations the usual answer is a PVC coating over the galvanised core. The plastic layer adds a barrier and, in a dark colour, makes the fence read as a boundary rather than as a cage. The trade-off is that a damaged coating cannot self-heal, so handling and tensioning matter more.
Fixing and Line
Three details decide whether the finished fence looks right: the posts must be set to a string line rather than individually plumbed, the tension bars must be the full height of the panel, and the rail must be fitted before the fabric is stretched. Fitting the rail last pulls the posts out of line and is the most common reason a new fence looks tired.
Heights and Post Spacing
A rail changes how the run is spaced. A railed run carries the top of the fabric, so posts can be set further apart than a run held by tension alone, and the fabric does not fold over as the ground settles.
Height and spacing are set together: a 1.8 m railed run at 3 m centres behaves very differently from the same rail at 2.4 m centres under wind. Send the height and the exposure with the run length, and the spacing follows from those two.