Razor Wire Topping for Airport Fence Runs
What the Topping Is For
A topping is not there to make the fence look secure. It removes the last comfortable handhold at the top of the run, which is the only part of a two-metre fence a person can use without tools.
Concertina Coil
Concertina is a continuous spiral of razor tape. It compresses when pushed rather than staying where it is placed, so a hand or a ladder placed on it moves away.
Coil diameter and tape thickness are the two numbers that matter. A larger coil spans more of the gap between posts; a thicker tape cuts at a lower force.
Panels, posts, topping and gates are quoted against the run and the brief, so the system is agreed before the steel is cut.
Flat Wrap and Barbed
Flat wire is stretched in runs across brackets rather than coiled. It is faster to install, easier to maintain and cheaper per metre, and it does not sag between posts the way a coil can.
Barbed wire is the lightest option and the least effective on its own. It is normally used where the brief asks for a visual deterrent rather than a delay.
How the Topping Is Carried
The topping hangs on arms fixed to the post, not on the panel. Arms hold the coil forward and above the run so the weight is carried by the post rather than by the top wire of the mesh.
This is why airport posts are cranked or Y shaped. A straight post with a coil laid on top of the panel loads the panel in a way it was not designed for.
Maintenance and Handling
Razor topping is a maintenance item. Coils loosen, tapes snag and brackets bend, and every one of those needs a person at height with gloves and the right tool.
Allow for it in the specification: spare coil, spare brackets and a stated fixing interval. A run that cannot be maintained safely is a run that will be left.