Vinyl Coated CA Temporary Fence System
A System, Not a Panel
The CA temporary fence is a modular system: identical panels, identical feet, couplers that join them at any angle. A site buys or hires modules and arranges them to fit the boundary it has this month.
That is why the panel is only half the specification - the coupler and the foot decide how the system behaves.
How the Modules Work
Panels are welded tube frames with mesh, dropped into blow moulded feet, joined at the uprights with couplers. No part needs a tool beyond a spanner for the coupler bolts.
Because every part is interchangeable, a damaged panel or a lost foot is replaced from stock rather than fabricated.
Vinyl Coating
The vinyl coating gives colour and a smooth surface, and it is what makes the system presentable on a residential frontage. Underneath, the wire and tube are galvanised; the coating is the appearance layer, not the corrosion layer.
Coating thickness at the couplers matters, because that is where panels rub against each other every time the run is moved.
Extending and Reducing a Run
Adding a panel means adding a foot and a coupler; reducing means taking them out. A run can be shortened without cutting anything, which is the whole point on a site that changes phase.
Corners use the same coupler at an angle, and the corner panel carries more load than the straight ones.
Where the System Suits
Residential construction, event perimeters, school works and any site that has to look tidy and move often.
On a long straight perimeter that will not change, a simpler post-and-panel run is cheaper for the same barrier.