6 ft x 10 ft Chain Link Temporary Panels
What the Size Gives
A 6 ft by 10 ft panel is the standard North American portable size: 1.83 m high and 3.05 m wide, covering about 3 m of run per panel. Fewer panels mean fewer feet and faster set-up.
The height is enough to read as a boundary, and the width is the widest that two people can still handle with a panel lifter.
Chain Link in a Portable Frame
Chain link needs tension to be rigid, so in a portable panel it is stretched inside a tube frame with a tension bar at each end. The frame carries the load; the mesh provides the barrier.
If the mesh is slack the panel drums in wind and the frame takes the movement at its corners.
Mesh and Wire
Common mesh is 2 inch (50 mm) on 9 to 11.5 gauge wire. Heavier wire resists cutting and denting; lighter wire is easier to handle and cheaper per panel.
The mesh size also sets how much the fence blocks the view, which matters where a site has to keep sightlines for pedestrians or cameras.
Feet and Coupling
Panels stand in plastic or concrete feet and couple at the uprights. A 10 ft panel catches more wind than a shorter one, so the foot weight is the limiting factor on an exposed site.
Couplers should allow a corner angle; a corner panel carries more load than any other in the run.
Where It Is Used
Construction perimeters, plant yards, event boundaries and long straight runs where the number of feet matters.
On a site with tight corners or frequent changes, shorter panels are easier to handle even though they need more feet.