PVC Coated Temporary Fence Panels with 60 x 150 mm Mesh
What 60 x 150 Mesh Gives
A 60 x 150 mm aperture is tighter than the usual 50 x 200 mm on a temporary panel. It closes the gap a hand or a tool can reach through, and it reads as a more solid boundary from a distance.
The cost is weight and wind load: the same panel in a tighter mesh catches more wind, so the foot has to be heavier or the run shorter.
Coating and Colour
The durable build is galvanised wire, welded, then PVC coated. The zinc carries the corrosion protection and the PVC gives colour and a smooth surface that does not snag clothing.
Coating straight onto untreated wire looks the same in a photograph and fails at the first scratch, because there is no zinc underneath.
Panel Sizes and Feet
Panels are supplied at 1.8 m to 2.1 m high and around 2.4 m wide, with blow moulded plastic feet or concrete blocks. Colours are usually orange, blue, green or yellow.
Foot type should be chosen against the surface: a plastic foot on soft ground sinks, and a concrete block on a finished surface marks it.
Where It Suits
School and hospital sites, event boundaries, works next to public footpaths, and any site where a tighter mesh is required for safety rather than for security.
On a long exposed perimeter the extra wind load from the tighter mesh is the deciding factor, not the mesh itself.
Packing
Panels nest and stack flat; feet pack in separate counts. Because a tighter mesh adds weight, bundle counts are set lower than for a 50 x 200 mm panel of the same size.
Bundles are banded and labelled so the site can allocate by panel size without breaking them open.