Metal Wire Mesh Fence Panels for Boundaries
The Panel as a Unit
A boundary mesh fence is built from panels fixed to posts, not from mesh stretched on site. That makes each panel a unit: it can be replaced, moved or extended without touching the rest of the run.
The trade-off is that the panel has to be stiff enough to span between posts on its own, which is what the frame and wire size are for.
Mesh and Frame
Panels are welded from 3 mm to 5 mm wire on a 50 x 100 mm or 50 x 200 mm grid, with a folded or welded frame on the edges. The edge is what stops the panel deforming at the fixing points.
A panel without a framed edge relies on the mesh itself and will pull out of shape at the first tightening.
Posts and Spans
Square hollow section posts at 2.5 m centres are the common arrangement. Wider spans need a heavier post or a folded panel; the panel and post are matched, not independently chosen.
Shortening the span is the cheapest way to keep a long boundary straight, and it also raises wind capacity.
Where It Is Specified
Industrial boundaries, compound edges, storage yards, school perimeters and any run where a fence has to be replaced in sections rather than rebuilt.
On a long boundary with no access for maintenance, the coating specification matters more than the panel price.
Coating and Repair
Galvanised after welding covers the weld, which is where a welded panel starts to rust. Powder coating over the zinc adds colour and a second barrier.
A damaged panel is unbolted and replaced; a damaged run of stretched mesh has to be re-tensioned. That difference is the practical argument for panels on a site with plant moving around.