3D fence

D and W Head Steel Fence Panels

D and W head steel fence panels: how the pressed head profiles differ, bar versus tube, the coating build, and where each profile is used.
  • D and W Head Steel Fence Panels
  • D and W Head Steel Fence Panels
  • D and W Head Steel Fence Panels
  • D and W Head Steel Fence Panels
D and W Head Steel Fence Panels
Steel fence panel with pressed spear heads in a residential setting

Two Head Profiles

The head is the top of each vertical bar. A D head is a rounded pressed cap; a W head is a pressed spear with a wider shoulder. Both are formed by pressing the bar itself, not by welding a separate cap on.

The profile is the visible difference between two otherwise identical panels, and it is what most buyers specify first.

Bar or Tube

Solid bar resists, tube is lighter

Solid bars of 12 mm to 16 mm give weight and a solid feel; tube sections of 20 mm to 25 mm give the same visual mass at lower weight and cost. Pressed heads work on solid bar; tube usually carries a welded or pressed cap.

A fence specified as 'steel' without saying bar or tube can be either, and the delivered weight will differ by a third.

Black steel fence panel with vertical bars

Rails and Assembly

Long steel fence run with spear-topped bars

Panels carry a top and bottom rail, sometimes a mid rail, welded to the bars. Rails are what keep the bars in line; a panel with only a bottom rail flexes visibly in wind.

Panels are bolted to posts or set into them, and the fixing should not be visible from the street side.

Coating Build

The durable build is hot dip galvanised then powder coated, usually black. Galvanising first is what protects the inside of a hollow section and the cut ends.

Powder over untreated steel looks identical on delivery and rusts from the fixing holes within a season.

Steel fence run along a boundary wall
Steel fence panels installed beside a building

Where Each Profile Is Used

D head reads softer and is common on housing edges and gardens. W head reads sharper and is used on commercial frontages and where the fence is part of a security line.

Both are decorative first and barrier second; neither replaces an anti-climb panel where climbing is the risk.

What to Send

Picket steel fence panel shown with the rail layout

Send run length and height, head profile, bar or tube size, rail layout, colour and finish, post type, gate widths and the port of discharge.