6 ft x 10 ft Portable Chain Link Panels
Panel and Foot as One Set
A 6 ft by 10 ft portable panel covers about 3 m of run and stands in its own foot. Panel, foot and couplers travel together - a panel without its foot is not a fence, and in practice that is what goes missing between projects.
Hire fleets number their feet with the panels for this reason, not for inventory pride.
Why This Size
10 ft width means fewer panels and fewer feet per metre than a 2.4 m panel, which is the whole point on a long perimeter. It is also the widest panel two people can lift and place without a machine.
On a site with tight corners or soft ground, the wider panel becomes awkward and a shorter one works better despite more feet.
Hire Stock Specification
A panel that will be moved dozens of times needs a frame wall thickness and a coating that survive handling: galvanised after welding, with the mesh tensioned inside the frame rather than left slack.
Slack mesh is the first sign that a hire panel has been abused; it drums in wind and the frame takes the movement at the corners.
Re-Setting a Run
Panels uncouple, stack flat and reload. Because they are identical, a damaged panel is swapped rather than matched to its position in the run.
Set the corners first, then the gates, then fill: working from one end leaves the closing gap at the far corner.
Feet, Ballast and Wind
Plastic feet are filled on site, concrete blocks used where the surface will take the weight. On a smooth slab a plastic foot slides; on soft ground a filled foot sinks.
The run needs returns at the ends or heavier feet; a straight free-standing line is the shape that goes over first.