358 Security Fence

358 Anti-Climb Security Fence Panels, Factory Direct Supply

Buying 358 panels direct from the works changes who is accountable for the panel, the fixing and the finish. This page sets out what arrives in one consignment and what is checked before it is packed.
  • 358 Anti-Climb Security Fence Panels, Factory Direct Supply
  • 358 Anti-Climb Security Fence Panels, Factory Direct Supply
  • 358 Anti-Climb Security Fence Panels, Factory Direct Supply
  • 358 Anti-Climb Security Fence Panels, Factory Direct Supply
358 Anti-Climb Security Fence Panels, Factory Direct Supply
Rows of 358 anti-climb mesh panels photographed from below

What Direct Supply Changes

Buying through a trader adds a step between the works and the site. Buying direct removes it, which matters most when something has to be corrected: the panel, the fixing and the finish are all made in one place, so a query does not have to travel through a third party.

Panel, Post and Fixing as One Set

Panels are quoted with the parts that hold them, not as a panel alone.

What travels together

  • Welded 358 mesh panels with folded edges

  • Square or rectangular hollow section posts, with cap and base plate or footing detail

  • Full-height flat bar clips or security bolts matched to the post section

  • Gate leaves with frame, hinges and latch where a gate is required

Clips are matched to the post section rather than picked from a general list, because a clip that does not seat on the post is the most common reason a panel rattles.

Clips, caps and gate hardware are quoted against the post section and the leaf weight, so nothing on site has to be improvised.

Exploded view of a 358 panel assembly with clamp, security bolt and post cap

Checks Before Packing

358 panels and posts stacked for packing in the workshop

Each consignment is checked against the order before it is packed.

What is checked

Panel count and height against the packing list, the post section and length, the clip type and quantity, and the finish called for on the order. Panels are banded so that a bundle can be lifted without the edges rubbing, and gate hardware is packed separately and marked against the leaf it belongs to.

Marking matters more than it sounds: a two-leaf gate installed with mixed hardware does not close square, and the fault appears weeks later.

Where the Panels Are Used

  • Industrial and utility perimeters

  • Storage yards and compounds

  • Internal partitions and roofline panels

  • Boundaries where an open mesh fence would be too easy to climb

358 mesh fence installed along a building perimeter
358 mesh panels set on a low wall along a boundary

Height and Wind Load

A dense panel presents a solid face to the wind, so the post spacing and section are set by wind load rather than by panel weight.

What to tell us

Send the site's wind region and the height required. Where the run is exposed, spacing tightens and the post section grows; quoting a panel without that information is how a run ends up leaning after the first storm.

How to Order

White background view of a 358 anti-climb mesh panel

Send the run length and height, gate widths, the finish, the post fixing and the destination port. Setting-out drawings showing post positions, gate openings and foundation details are issued with the order.

Supply only outside China; erection is by the client's contractor.